Less is more!Ĭhannels 1 and 2 have a one-knob compressor. Now you can adjust the amount of FX applied using the FX knob on the channel strip.

Hit the FX on button, set the FX return level knob to the triangle position, and rotate the FX selector to activate your desired effect. If you turn down all three bands of EQ, you are essentially lowering the volume of your input. Leave this off for microphone inputs.ĮQ can help reduce feedback try reducing either the high or mid-levels slightly if you’re having issues. The “PAD” button next to the high pass filter is for line-level inputs line drum machines or keyboards. This helps to clean up any vocal audio by cutting off frequencies below 80 Hz. Increase the gain knob until the level meter shows -6 to 0 dB during normal speech.Īctivate the high pass filter by pressing the “HPF” button under the XLR input on your mic channel. The gain controls the preamp, which amplifies the weak signal coming in from the microphone. You’ll notice there is no movement on the sound meter when you speak into the mic as we still need to set the gain. Set the level knob at the bottom of the channel strip to the triangle (zero/unity) position. All of the knobs under that input are known as the channel strip, and they will only affect that input. Use an XLR cable to connect a microphone to the first available channel (1-4). – Turn the red stereo level knob to the triangle (zero/unity) position. – Turn green and red knobs to the 12 o’clock position. – Turn white and yellow knobs all the way down. To avoid any surprises, reset all of the mixer knobs to their initial position.

Set the mixer as the audio source for your computer/recording software.

This is a 2-in, 2-out connection, meaning you get stereo output from the mixer and two channels of audio coming back in from your computer. Insert the USB cable into the back of the console and connect to your computer.

To give you an overview of using the MG10XU and explain some of its features, here’s a quick start guide to setting it up with a microphone.Ĭonnect the 3-pin locking power cable to the input on the back of the console and turn the power switch on. How to use the Yamaha MG10XU USB Audio Mixing Console It’s safe to say the MG10XU is an extremely reliable audio mixer.Ī live event that requires in-person event audio as well as streamed audio for online guests. We have put these consoles through between 5000-7000 events, and they have never let us down.

How to use mixpad audio mixer youtube